| Overview
Introduction
MultiMetall Germany invests for more than 30 years in polymer-metallic material technologies for the maintenance of metals and alloys. In plants and constructions often functional particularly important components are exposed to stresses like break, tear, corrosion, cavitation, chemical or thermal demands. Components treated with PolymerMetals can be preventatively protected against above mentioned stresses. Furthermore MultiMetall´s cold repair technology facilitates a gentle material treatment and a durable repair of damaged parts.
Wherever technical security is concerned, PolymerMetals offer the required quality. Certificates from classification societies, test results from research laboratories as well as positive evaluations from customers worldwide verify that fact. Even at problematic surfaces, on oil, grease, fuel or under water, PolymerMetals are used. This technology is called „Direct-MM-Bonding“.
PolymerMetals - Excellent properties
Engineers and technicians need to have a clear picture of the quality of the products available on the market to be able to choose the best product. Therefore we decided to list excellent properties of different MultiMetall-products in the following overview. Please make your own comparison and let the figures speak for themselves.
MultiMetall products have been approved by Classification
Societies such as :
| No. |
Bureau |
Country |
No. Document |
| 1. |
Biro Klasifikasi Indonesia |
Indonesia |
413781 |
| 2. |
American Bureau of Shipping |
USA |
TA 0696 |
| 3. |
China Classification Society |
China |
HB96PO579 |
| 4. |
Det Norske Veritas |
Norway |
SD-236/Eva/Kih/332.0 |
| 5. |
Germanischer Lloyd |
Germany |
87252/94 Arp/Ha |
| 6. |
Indian Register of Shipping |
India |
GEN/96 |
| 7. |
Lloyd’s Register of Shipping |
England |
301954 |
| 8. |
Nippon Kaiji Kyokai |
Japan |
91 MC74 |
| 9. |
Russian Register of Shipping |
Russia |
93.0205.123 |
Availability
Technical data sheets are generally available in German or English language. PolymerMetals are only produced in Germany and delivered worldwide within short time by MultiMetall. In addition to that our products are internationally available from many MultiMetall-partners. Ask for further products from MultiMetall.
Repair of components with PolymerMetals
air sleeves • axles • bearing housings • bearing seating • boiler • compensators • compressors • condensers/capacitors • conveyor belts • cooling tubes • cyclone • cylinder barrels • cylinder sleeves • engine blocks • engines • exhaust pipelines • exhaust pipes • exhaust turbines • gaskets • gearbox housings • guide rails • heat exchangers • housings for gas inlet and outlet • hulls • hydraulic cylinders • hydraulic oil pipes • hydraulic pistons • impellers • kort nozzles • oil coolers • oil pipelines / oil feed pipes • oil tanks • petrol pipelines / petrol feed pipes • petrol tanks • plain bearings • plungers • propellers • pumps • rudder bearings • seals • shaft plates • shafts • slab frames • spline shafts • steam pipelines / steam feed pipes • tappet guides • transformers • turbine housings • turbochargers • V-grooves / keyways • valve housings • valves • vibration dampers • water coolers • water pipes • water tanks
Trademarks
MultiMetall®
PolymerMetal®
Ceramium®
Molymetall®
Sealium®
XETEX®
Reference list (Extract of German customers)
ABB, BASF, KSB Aktiengesellschaft, Steag, DEA Mineralöl AG, Deutsche Shell AG, Porsche, Daimler-Chrysler, Bayer AG, GEA Energietechnik GmbH, VEBA, Texaco, Blohm & Voss, Howald Deutsche Werft, Hapag-Lloyd Container Linie GmbH, MAN B&W Diesel AG, MBB, Gränges Metalock, RWE Energie AG, Thyssen Henschel Industrietechnik GmbH, Mannesmann AG, Mannesmann Rohr, Saarbergwerke AG, Siemens Anlagenbau, Siemens Energieerzeugung KWU - Industrieturbinenbau & Kraftwerke, Thyssen Krupp Stahl AG
|
